Kettler Topstar Ping Pong Table Leg Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket for attaching the support beams to the underside of the table.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 581
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
I recently got a Kettler Topstar ping pong table but it was missing some parts. I designed this model from one of the non-missing parts.
 Genuine part |  Replica part |
It seems to do the job. I would recommend printing it in PETG. Layer height probably doesn't matter too much for this, but I did .15 layer height.
If you're missing screws, the closest I was able to find was 6 x ¾ Pan head phillips sheet metal screw. The 8 x ¾ may also work. It appears the genuine screw is somewhere between those two options. I'm using the 6 x ¾ and it appears to be working fine.
