Basic test for a hood - waistlevel finder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Collapsible photo hood, first test, stil alpha
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Project HOOD!
This is the third test print. Trying to make a print-in-place collapsible hood. The idea is to remove the object from the plate after pulling in the shafts of the hinges.
beware, it is still lacking:
0: the super important lower part of the system and main hinge (up-down closing rotation axis)
1: better 5 flange hinges
2: slots for main springs and antagonist springs
3: latch system for opening and closing
4: Magnifying lens (find a source, right distance mounting points, and leave the possibility to tune a 5mm up and down) Maybe a fresnel card?!
5: declinations or links to other projects that could help with declinations for the various cameras.
Does anyone want to help?