Stealth Press Center piece for 200-600mm rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Center piece for a rail 200-600mm long.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 166
- Wydruki
- 2
- Wyświetlenia
- 941
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
I saw someone had made a 400mm rail version and I wanted a 350mm for myself. Ended up generating all of them between 200mm and 600mm every 25mm.
Notes:
* Above 400mm might be too long
* Below ~250mm might be too short. But you could use a longer version and skip the bottom couple of bolt holes.
* If your rail isn't divisible by 25mm you can likely use the size up and leave a small gap on the bottom.
* The stock 300mm has 6 front holes using 6 inserts and 6 screws. Adjust your part requirement as needed.
* Skipped 300mm as it's stock and I didn't want to upload that again.
* No cad files as it's all just the main steal press cad with 25mm chunks added or removed.
* If you can't print long enough you can use two center parts. For an example 400mm you need one with 10 holes. So you could print two 275mm ones as they each have 5 holes..