1 / 1
30mm Holden Lion Pendant
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1 x Solid Back 1 x Hollow Back 3mm hole for necklace or strap
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Solid Back
0.2mm layer height
I done a filament change at layer 11 and 21 to get solid back and border the same colour but highlight the lion in orange
Hollow Back
0.2mm layer height
I copied the previous print setting but you only need to filament change at layer 21 to get the multi coloured like mine
I thickened the neck and arm for the hollow back model for strength so it looks a little different