1 / 3
Anycubic Kobra 2 (Pro/Neo) - Feet — zdjęcie 1
1 / 3

Anycubic Kobra 2 (Pro/Neo) - Feet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This project includes new feet for the Anycubic Kobra 2 (Pro/Max) and more.

Ocena
4,769 / 5
Polubienia
175
Pobrania
1233
Wydruki
15
Wyświetlenia
5059
Oceny
13

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Hello,

to compensate the forces from fast printing, i created a new “pair” of feet from scratch.

Also the new feet fit so well, that when you move your printer, the feet stay connected.
You also can use them for other printers, if the feet have an diameter of 17mm.
If it fits to your printer, give me an update.

Print Instructions:

  • no support
  • no brim
  • optional: set extrusion width to 0.6 (even with 0.4 nozzle)
  • optional: set layer height to 0.3
  • optional: PETG

Printtime: 1h-2h

Optional:
You can use mirror tape on the bottom of the skids to be sure, the printer stays in place.
I had some experiments with tpu at the skids, but because of the pure force, it is more reliable to use tape. 
 

Tagi