hc diana holster MOLLE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
holster for your diana designed for a molle belt
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 216
- Wydruki
- 1
- Wyświetlenia
- 1564
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
printed holster for the diana, you will need 2 m3x6mm screws to attach the retention clip. The holster should be printed out of pla or another equally stiff material with a large number of walls and a brim as the surface touching the bed is rather small. The clip and the molle strip can be printed from pla but the clip should ideally be a more heat resistant material like petg as it sits right on the hot motor heatsink and could soften. fits on all the molle gear I have but can be a bit of a pain to put on. not verified to fit with an optic on top but there is a good amount of room, if your optic stays behind the rearmost screws for the flywheel cage and doesn't hang off the edges very much I think it will clear.