1 / 1
Fatkong — zdjęcie 1

Fatkong

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fat, ugly, King Kong. =)

Ocena
5 / 5
Polubienia
16
Pobrania
115
Wydruki
1
Wyświetlenia
437
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Print Settings

  • Material: Spectrum - Chocolate Brown Pla
  • Nozzle: 0.4mm
  • Layerheight: 0.1mm
  • Supports: Paint on Object if you want, not necessary
  • For a nicer surface: Change the Lift Z to 0.1
  • Seam paint: Modell backside

For Mini Settings
Printer Settings - Extruder

  • Length: 1.2
  • Retraction Speed: 40
  • Retract amount before wipe: 0

This is necessary because I have noticed that the mini sometimes leaves rather ugly scars, not only when changing layers, but every time after retraction and travel.
I hope and the observations show that these settings have improved on this settings.

Post Process

Scalpel can be used to easily remove any  residue left on it.

Tagi