Christmas Ornament Hook - 3 sizes for all situations
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hook to hanging ornaments on the tree or on the wire of light strings. Quick & easy printing, nice edges, easy to remove
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 580
- Wydruki
- 2
- Wyświetlenia
- 1321
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution
The build is straight forward, simply print with your favourite filament. I use a green PLA, but most filaments should be suitable.
The wide openings make it easy to add 3D printed ornaments onto your tree.
- Nozzle: 0.4mm
- Layer height: 0.2mm
- Layer width: 0.5mm
Use all the other settings you normally use for your filament.
The approximate dimensions of the three hooks are:
- Small - 42 x 20 x 2 mm
- Medium - 48 x 25 x 2 mm
- Large - 57 x 27 x 2 mm
They can be made smaller, but it's best to be careful with the changes. I have tested on the large hook:
- X: 90%
- Y: 70%
- Z: 100%
This made for a smaller hook, but still has the strength to be useful.