3D Printed Acoustic Guitar Bridge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Generic 3D printed bridge for a full size acoustic guitar.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 172
- Wydruki
- 0
- Wyświetlenia
- 1147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
I broke the bridge on my Yamaha FG-365, and didn't want to deal with ordering a new one that possibly didn't fit, so I made this in FreeCAD. It gives almost the same performance as the factory's, with the string action just slightly higher. It seems to be a fairly universal part when compared to other guitars I have. It is a very simple part, so printing should be fairly easy; no worries about supports or anything. For some reason, I can't upload the gcode, but it is fairly simple to make it in PrusaSlicer. I hope this helps someone!
Note: Printables won't let me upload my gcode as such, so I zipped it and uploaded that.