XBOX One/Series Controller and Headset Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on LUN5H TIME's original wall mount, this redisigned XBOX One Controller and Headset mount prints without supports
- Ocena
- 4,667 / 5
- Polubienia
- 64
- Pobrania
- 689
- Wydruki
- 4
- Wyświetlenia
- 2227
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed from LUN5H TIME's original Xbox 1 Controller / Headphone Wall Mount V2
I redesigned this model using the original design side profile as it works great for holding the XBOX Controller. However, the controller can move left and right and I was planning on mounting this in an RV and didn't want the play, so I made the mount wider to remove any side to side movement. I also kept it simple so it can print on its side which results in no supports needed and a stronger print.
Print Recommendations
- No Supports Needed (prints on side)
- .20mm Layer Height
- 15-20% Infill
- 4 Vertical Shells/Perimeters (for added strength)
- Rotate model to print on its side (see photo)
Holes are designed for ¼-20 counter sunk bolts.