TS100 Power Adapter for Makita Batteries
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple XT60 snap-on adapter for Makita batteries (STAR protection, only)
- Ocena
- 5 / 5
- Polubienia
- 86
- Pobrania
- 295
- Wydruki
- 4
- Wyświetlenia
- 4537
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
A simple XT60 snap-on adapter for Makita batteries, but I only recommend using the ones with the little star marking on them, as these are the only ones with battery protection.
I have an Instructable here describing the how-to: https://www.instructables.com/TS100-Power-Adapter-for-Makita-Batteries/
I have included two base adapters (One with captive nut and one with thread inserts) as well as two lids (Only use the: Old lid no safety if you know what this means)
Print instructions
I recommend printing all the parts in e.g. PETG or ASA
You need support everywhere when printing the base adapters
Makita base adapter captive nut
Remember to pause the print at around 5.2mm to add the captive nut.