Probe holder for VESA Oscilloscope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Measuring tip holder for VESA oscilloscope for 100x100 VESA
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 88
- Wydruki
- 2
- Wyświetlenia
- 669
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have created a holder for four measuring tips. These can be attached to the VESA screw points of the oscilloscope. The negative of the probes is adapted for Rigol DHO probes. It is suitable for VESA 100x100 mm
You need 2x M4 threaded inserts and 2x M4 screws 5-10mm (8-15mm for V2) long. To attach it to the oscilloscope, you may need 4 screws to screw it to the VESA mount. When printing, the top of the insert is on the print bed
--13.10.2024-- New Version V2
New version with 18mm distance between oscilloscope and holder for better ventilation. Mounting screw 4x M4x30 are required for mounting on VESA bracket