Team Awesome - Avengers-style sign
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You are Team Awesome! Greetings to all cyber warriors!
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 34
- Wydruki
- 1
- Wyświetlenia
- 219
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a sign in Avengers style which I designed for my former colleagues - Team Awesome!
What is needed?
To save on filament swaps, I provided 2 files:
- the sign with the "AWESOME" text
- the “TEAM” patch
After printing, you will need to glue the patch to the sign. If you don't want that, you'll need to stitch the two models together yourself.
How to print
The bigger you print it, the more awesome it gets!
I printed the sign at 80% scale for X and Y (keeping Z at 100%), resulting in a sign of 240mm x 120mm. As far as the TEAM patch is concerned, I played around with the scaling (see photo 3), and finally decided to go for 75% scale for X and Y (keeping Z at 100%), i.e. 32,24mm x 15mm. Feel free to play around with the scaling and positioning of the patch.
Of course, the sign will only look awesome if you print in mutlicolor, i.e. switching color after 50% of the layers - concerns both the sign and the patch.
I printed in matte PLA with 0.2mm layer height. However, any material will work, print settings aren't much of topic.
Depending on your bed adhesion, the bottom layer might be difficult to remove from the bed without damaging the back of the card. For me, it worked best to cool the plate down as much as possible (5 minutes outside while it was snowing turned out to be enough ;-)) before removing the card with a scraper.
No supports or brims required.
Step files are provided for best print results and further modification.
Enjoy and stay awesome!