French Cleat Drink Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Don't put wet cans on your work tops! Put them in this french cleat drink holder instead.
- Ocena
- 4,8 / 5
- Polubienia
- 37
- Pobrania
- 176
- Wydruki
- 5
- Wyświetlenia
- 833
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This print is in two parts specifically for support-free printing. It's dovetailed for strength and easy assembly. I use CA glue or epoxy for assembling these; both work fine, since the dovetail joint counters gravity when hung on your french cleat rails. This is designed for cleats made of ¾" / 19mm material, but anything pretty close to that thickness should support it just fine. This fits standard soda and beer cans, tallboys included. The open bottom with groove is a filament saver and prevents condensation buildup.
I print mine with PETG, but I expect that any reasonably rigid filament would probably perform well.