1 / 4

WeatherDuino AQMIII Plantower PMS7003 indoor case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sun_Dancer

@Sun_Dancer_1528174

This is a 2-part indoor housing for the WeatherDuino Air Quality Monitor III with Plantower PMS7003 SPS30 for particle…

Ocena: 0 / 5
Polubienia: 1
Pobrania: 22
Wydruki: 0
Wyświetlenia: 417
Oceny: 0

Aktualizacja u źródła: 6 gru 2023

Informacje o modelu

Źródło: Printables
Kategoria: Other Ideas
Licencja: Creative Commons — Attribution

Szczegóły Pliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (1)

This is a 2-part indoor housing for the WeatherDuino Air Quality Monitor III with Plantower PMS7003 SPS30 for particle measurement, MH-Z19 for Co2 measurement and 1.3 inch OLED.

You can find information about the WeaaterDuino here: https://www.meteocercal.info/forum/Thread-Air-Quality-Monitor-III-Overview

The PMS7003 is inserted into the front half of the housing and covered with the cover part.

The OLED is simply plugged in and sits firmly.

I used this Oled: https://www.amazon.de/gp/product/B078J78R45/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

The AQM board is attached between the two halves of the housing with 4 M3x10 screws.

This case is a functional prototype, I'll be using an outdoor case myself, so I haven't tested the wall bracket. I'm leaving the case as a work in progress, please leave your impressions, tips or hints for changes that should be made.

The power connection can be found here: https://www.amazon.de/gp/product/B0975TSZRV/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1