(UPDATED) Ender 3 V3 SE Vent Ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a re-imagined 3DDP vent ring.
- Ocena
- 4,286 / 5
- Polubienia
- 422
- Pobrania
- 2719
- Wydruki
- 29
- Wyświetlenia
- 13 443
- Oceny
- 21
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
(UPDATED) 12/19/23
Re-made the ring from scratch.
1 - Fixed the gap issue between the fan and ring.
2 - Now has 3 more vents than the original. Much less back flow through the fan now (still a small amount, but no where near like before).
3 - Vents now push air straight out and down.
4 - Increased the overall volume inside the model.
This is a now re-imagined Vent ring from _3DDP_ that fits an Ender 3 V3 SE.
Must be paired with Sand's lightweight fan shroud found on Printables.
https://www.printables.com/model/637754-ender-3-v3-se-lightweight-fan-shroud
May also work with Muganon's Fan shroud. UNTESTED
Print settings:
Nozzle diameter:
0.4 mm
Layer height:
0.2 mm
Infill density:
100%
Supports:
None
Material:
PETG
DISCLAIMER:
I am by no means an engineer, just a hobbyist that loves tinkering :)
PS: Don't mind the gray PLA print. It printed at max speed and a not perfected z-offset, it did some weird things, it's mainly to help show the details better :)