Tokreal Tesla to J1772 Adapter Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the Lectron Tesla to J1772 adapter. The wall plate from the original is required to complet the mount
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This is a wall mount to hold the Tokreal Tesla/NACS to J1772 adapter as available on amazon. At the time of this writing it's the cheapest adapter I could find and the quality seems to be quite good. I mounted mine on an angle like a holster, primarily to keep garage crud out of the 1772 connector. I would recommend printing in ABS or PETG if used in a garage. ASA would be the best choice for an outdoor use case. I printed in black ABS because it looks so nice. I would not use PLA because of the issues with deformity over time, inability to take heat and UV rays as something in a garage may deal with. That said and you do you.
You will need to download and print the original wall mount as I didn't re-create that part. You can mount on an angle for a more holster style presentation and it prevent crud from settling into the upturned J1772 connector.