Hemera carriage for Zaribo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a carriage for the Hemera from E3D, designed with the intent to work without changes of the firmware. I have…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a carriage for the Hemera from E3D, designed with the intent to work without changes of the firmware.
I have very limited time for this, Thats why I provide it in the hope that some one of the communitiy finalizes the Thing. And add
- Air flow and
Filament sensor to it. You don't need part cooling for PET, ASA and NinjaFlex
And depending on the parts you print, you dont need an filament sensor.
In short: This thing works!
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
Yes
0.2
Infill:
as you wish
Filament:
as you wish PETG as you wish
Notes:
The inner sides of both halfs are best printed laying flat up. As in the 3mf file. Otherwise there is the risk that the belt looses his grip.
You should use support blocker shown (red blocks) in the slicer.Category: 3D Printer Parts