Fluke 287 – 289 2020 30 Degree Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 30-degree angled meter mount to attach to 2020 aluminum
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 608
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Often my meter is needed but it takes up valuable desk space. I have 2020 shelving to hold my test equipment. Using a higher shelve, I can put my meter out of the way. By putting a 30-degree angle I can tilt it down to get a better viewing angle. Also, this mount can be used to get a better viewing angle if I lay it flat on my desk.
I added a back pocket as a place to hold test leads.
Note it takes long M4 bolts and washers to adjust it such that if fits properly in the 2020 slots. Normally the T nuts are M5. I did not have any long M5 bolts, so I used the long M4 bolts that I had on hand.