1 / 8
Glory (from Wings of Fire) - Painted model for Prusa XL — zdjęcie 1
1 / 8

Glory (from Wings of Fire) - Painted model for Prusa XL

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Multi-piece model of Glory, a dragon from the Wings of Fire book series. Pre-painted for you!

Ocena
5 / 5
Polubienia
190
Pobrania
925
Wydruki
4
Wyświetlenia
7091
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Creative Commons — Attribution — Noncommercial

This model is phenomenal!  It is very high res and scales very well!  I wanted to give a print of the model as a gift to a fan of the Wings of Fire book series and also take advantage of the 5 colors feature of my Prusa XL 5-tool.  

I painted the model based on various images of Glory that I found online.  I took some artistic license because painting in Prusaslicer is a pain and has very simple tools, that I'm a novice when it comes to artistic stuff and 3D model painting, and I only had 5 colors to work with.   As such it's not exactly what I believe the “canon” Glory looks like, but I think I did a good job!  It came out so well that I thought I should share my 3mf file to save people the hours upon hours of tedious painting.

I printed using Hatchbox PLA mostly, and AMOLEN Silk PLA for the Red/Gold as follows:

  • Hatchbox Metallic Green (modified default Hatchbox PLA settings with bumping temps to 230 deg C)
  • Hatchbox Metallic Light Green (modified default Hatchbox PLA settings with bumping temps to 230 deg C, but I think this had some stringing and possibly could use a drop in temps))
  • Hatchbox Light Blue (stock Hatchbox PLA settings)
  • Hatchbox Metallic Blue (modified default Hatchbox PLA settings with bumping temps to 230 deg C)
  • AMOLEN Silk Dual Color Red/Gold (used the stock Hatchbox PLA settings).  I had ordered a gradient filament but they shipped a dual color (it's split down the middle of the filament, which isn't ideal for the gradual transition I was going for), and I was impatient so I used it.  Still wasn't exactly what I wanted but is quite pretty.  I would still recommend a gradient filament and printing both wings at the same time so that the color on both transitions upwards in the print at the same rate.
  • Printed with the 0.2mm Structure preset with 0.6 nozzles.

 

 

Tagi