1 / 4
CT90K1 Carb to Air Filter Holder Boot - For Newer 2 Screw Carbs w/32mm Intake Opening — zdjęcie 1
1 / 4

CT90K1 Carb to Air Filter Holder Boot - For Newer 2 Screw Carbs w/32mm Intake Opening

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This carb to air filter holder boot is designed to be used with Honda CT90K1's that have incorporated a newer 2 screw…

Ocena
0 / 5
Polubienia
8
Pobrania
125
Wydruki
0
Wyświetlenia
820
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This carb to air filter holder boot is designed to be used with Honda CT90K1's that have incorporated a newer 2 screw carb with an intake opening of approximately 32mm.

This has been printed with TPU which provides enough flexibility to allow it to be installed in the air filter holder. It is a very snug fit, but a little oil can help make things easier. A more flexible material would make for an easier installation, but the TPU has some basic oil and gas resistance.

If you would like to see more items related to the Honda CT90 please visit my blog at: https://ct90restoration.blogspot.com

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

.15mm

Infill:

20


Filament:
SainSmart TPU Black

Category: Automotive

Tagi