CT90K1 Carb to Air Filter Holder Boot - For Stock 4 Screw Carbs w/36mm Intake Opening
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This carb to air filter holder boot is designed to be used with Honda CT90K1's that have a stock 4 screw carb with an…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 650
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This carb to air filter holder boot is designed to be used with Honda CT90K1's that have a stock 4 screw carb with an intake opening of approximately 36mm.
This has been printed with TPU which provides enough flexibility to allow it to be installed in the air filter holder. It is a very snug fit, but a little oil can help make things easier. A more flexible material would make for an easier installation, but the TPU has some basic oil and gas resistance.
If you would like to see more items related to the Honda CT90 please visit my blog at: https://ct90restoration.blogspot.com
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
.15mm
Infill:
20
Filament:
SainSmart TPU Black
Category: Automotive