Uncarded Prusa i3 MK3S+ Gift miniature
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
"Gift card" that assembles into a Original Prusa MK3 i3 MK3S+, remixed to remove the unnecessary card/sprue.
- Ocena
- 4,917 / 5
- Polubienia
- 76
- Pobrania
- 439
- Wydruki
- 23
- Wyświetlenia
- 3833
- Oceny
- 24
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Share Alike
Same as the original card, I suggest default settings with:
- 0.15mm layer height
- 0.4mm nozzle
These “gift card” models make great gifts, but what if you intend to assemble it right away? Why 3D print the card and sprue to immediately cut it off? Uses 64% material compared to the original.
This remix was a quick STL edit in TinkerCAD. Yes, TinkerCAD! Still the easiest mesh editor I know, and it keeps everything manifold. I made heavy use of the Workplane tool to align box-holes with faces of existing geometry, and surgically removed every excess bit of the model.
(The long skinny “poles” coming off the heatbed, x-axis motor, and extruder-- those are "cables," not sprue. They are part of the model.)
I will say this, printed sprue cards help to hold small parts in place. So I re-added one small helper tab shown here, like a supporting brim. Without it this part has very small contact with the bed; this should help avoid a failure. Gently remove this piece after printing. You can bend & snap it, or carefully use an exacto knife. (V2: improved this piece for printing reliability.)