Team Associated MT28 Upgraded Wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed these to replace the factory wheels since they have a ring that doesn't allow for any squish.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 2
- Wyświetlenia
- 364
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I added 1m to the width of the tire to “beef it up" a little bit while adding squish. It also reduces the weight from 6g to 3g per wheel, which improves performance since the car is about 120g and the total weight is reduced by 10%.
These are a replacement for the MT28 wheels with the following measurements:
25mm wheel diameter
13mm width
8mm inner bead width
Hopefully they also work for the other 1/28 scale models since they use the same chassis.
Print settings:
0.16mm layer height
2 walls
15% infill