Hercules Medallion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a Replica of the Medallion that Zeus gave to the Baby Hercules.
- Ocena
- 5 / 5
- Polubienia
- 210
- Pobrania
- 925
- Wydruki
- 9
- Wyświetlenia
- 3289
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is a Replica of the Medallion that Zeus gave to the Baby Hercules. Ready for your Possible Cartoon Prop or Cosplay project. with ribbon mounts on the rear that are a push fit no glue required.
I printed mine in Fillamentum Gold Happens so to get the awesome Gold Sparkle going.
and i used 25mm wide Red Satin Ribbon
I hope you enjoy.
Thanks
Bugman
If you like what I am doing please consider buying me a coffee or tipping. 😁👍
Print instructions
Printer: CR-10
Rafts: No
Supports: Yes
Resolution: 0.2mm
Infill: 10%
Notes:
The Medallion and Ribon Inserts should be both painted flat on there backs with support to help with the bridging in the medallion.
Post-Printing
cut a short piece of 1.75mm Filament
and another
position about 5mm from the end of the Ribbon
fold the Ribbon over the Filament
insert the filament and ribbon into the recess
then push in the insert
you will need to bang it into position
and repeat