1 / 1
Voron Trident or 2.4 XY Bridge Cable Chain Anchor, Raised 13mm for Backers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bridge is 13mm higher than stock, to allow for a stiffening backer on the 2020 rail.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 165
- Wydruki
- 3
- Wyświetlenia
- 840
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 7)Remiksy (1)Kolekcje (33)Powiązane
Print using the same material and settings as the default Voron parts. Uses the same screws.
I included the .stp in case someone needs it changed.
