Hippo Ornaments Angel & Devil
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hippo tree ornaments. One sometimes lies, the other sometimes tells the truth. (You may ask unlimited questions.)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Share Alike
I used no supports, pretty much works except the very bottom of the angel's wings are not quite right. I suggest perhaps custom supports just for those two spots. The models as provided stand about 2 inches tall, and I suspect may be a bit fragile at this size, depending on the details… if material quality or printer accuracy is under suspicion, you'd be wise to scale them up a bit. I did 20% infill on the two in PLA, and a TPU Devil at 15%. The PLA ones are kind of heavy actually (for their size I mean… They were around 26 & 33g respectively), 15% is probably better, or even 10%. I put a standard little loop on top, just add wire, or hook, paperclip or whatever, you'll figure it out :).