Bicycle / Bike Repair / Assembly Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds your bike while you are working on it.
- Ocena
- 5 / 5
- Polubienia
- 189
- Pobrania
- 787
- Wydruki
- 3
- Wyświetlenia
- 4754
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since commercally available bicycle repair stands are quite expensive, I decided to design one on my own. This assembly stand is supposed to hold your bike in a comfortable position, while you can work on it. I used 53mm pipes and did a simple welding construction to clamp it to my workbench. A M8 bolt and a thread in the pipe is used to set the desired angle. (not in list included)
Parts needed:
- Construction to conect the printed parts to. You can modify the CAD parts to do a different assembly.
Printed:
- Lower half
- Upper half
- Hand screw
Don't be too thrifty on the material!
Standard Parts:
- 1x M6 x 60 bolt (ISO 4762)
- 1x M6 hex nut self locking (ISO 7040)
- 1x M8 x 100 hex bolt (ISO 4017)
- 1x M8 hex nut (ISO 4032)
- Optional: coil spring
Assembly:
The M6 x 60 bolt thogether with the M6 nut builds a hinge between the lower and upper half. The M8 bolt combined with the printed hand screw part is used to open and close the grip and builds up the clamping force. Additionally you can insert a soft coil spring (over the M8 bolt, between upper and lower half) to improve the handling. Especially during one handed operation, while you are inserting your bike frame, this featuere is very beneficial. I also glued some patches of old tire tubes into the clamping parts, this helps with gripping the bike.
More photos following soon…