LEGO Technic car stand and wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal stand for LEGO Technic cars
- Ocena
- 5 / 5
- Polubienia
- 424
- Pobrania
- 2464
- Wydruki
- 8
- Wyświetlenia
- 16 889
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I haven't found a satisfactory stand for my LEGO cars, one that could display cars on shelf at an angle and possibly be wall-mountable that wouldn't be tied to just one set.
Cue my solution: elegant design that fits standard LEGO peg/connector pin in 5x11 studs layout. So it can mount any and all sets that I want to be displaying and has 2 screw holes for mounting to a wall.
BOM:
- A LEGO Technic car with suitable connections on the bottom
- 4 2L pins/connector pegs with friction
- 4 3L pins/connector pegs with friction, 2 2L pins with friction, 2 11L Technic beam, 1 5L Technic beam (see images)
- 2 M5 screws for wall mounting (at least 30mm in length with suitable wall/wood anchors)
Intended mostly for the ultimate cars series: Ferrari Daytona SP3 42143, Bugatti Chiron 42083, Lamborghini Sián FKP 37 42115, but is universal to any LEGO set in general that matches connector layout.