Kaleidocycle with Units of Different Lengths
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The unique feature of this kaleidocycle is that each unit has a different length.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Math
- Licencja
- Creative Commons — Attribution
The unique feature of this kaleidocycle is that each unit has a different length. A normal kaleidocycle is made by combining six identical units, but this kaleidocycle can be rotated even though the units are of different lengths.
このカレイドサイクルの特徴は、各ユニットの長さが異なることです。通常のカレイドサイクルは六つの同じユニットを組み合わせて作るものですが、このカレイドサイクルはユニットの長さがバラバラでありながらも回転が可能になっています。

This model was created based on information from the following website.
このモデルは以下のサイトの情報をもとにして作成しました。
For the mathematical background, please refer below. It is written in Japanese.
数学的背景は以下を参照してください。日本語で書かれています。
- Top page
- Mathematics Probrems Page ... See No.50
How to assemble
- Print Unit A through Unit F one at a time.
ユニットAからユニットFまでを一個ずつ印刷してください。

- Prepare 6 M3 bolts 12 mm long or print 6 "pins.step".
長さ12mmのM3ボルトを6個用意するか、あるいは「pin.step」を6個印刷してください。- If you use pins, you may want to pre-thread a 3mm drill through the small hole in the one with the lettering.
ピンを使う場合、文字が書いてある方の小さな穴に3mmのドリルをあらかじめ通しておいた方が良いでしょう。- The pins are small and may require a raft.
ピンは小さいのでラフトが必要かもしれません。
- The pins are small and may require a raft.
- If you use bolts, they can be self-tapped and screwed in as is, so drilling is not necessary.
ボルトを使う場合はそのままセルフタップでねじ込めるので、ドリルは不要です。- Be careful not to over-tighten the bolts, as they will not be able to deform.
締め付けすぎると変形できなくなるので注意してください。
- Be careful not to over-tighten the bolts, as they will not be able to deform.
- If you use pins, you may want to pre-thread a 3mm drill through the small hole in the one with the lettering.
- Connect units A through F in alphabetical order with pins or bolts.
ユニットAからユニットFまでアルファベット順にピン、あるいはボルトで接続してください。

- Bend the finished product and connect unit A to unit F, and you are done.
出来上がったものを折り曲げて、ユニットAとユニットFを接続すれば完成です。

Parameters
If you are able to use Fusion360, you may change the following parameters to make a different shape.
Fusion360が使える方は、以下のパラメータを変更して違った形のものを作ることができるでしょう。

Update 12/17/2023.
2023/12/17更新
In the first uploaded version, the first form is an equilateral triangle and the second form is closer to a right triangle.
I tried to make this second form more strictly close to a right triangle. I uploaded the result as "equilateral and right triangle.3mf".
Since it is difficult to formulate and solve the equation, I have found the values by trial and error in a spreadsheet software.
最初にアップロードしたものは第一形態が正三角形、第二形態が直角三角形に近い形になっています。
この第二形態をより厳密に直角三角形に近づけてみました。この結果は「equilateral and right triangle.3mf」としてアップロードしておきます。
式を立てて解くのは大変なので、表計算ソフトで試行錯誤して値を見つけています。
- length_A = 20
- length_B = 50 - X
- length_C = 40 - X
- length_D = 30
- length_E = 45 - X/2
- length_F = sqrt(A^2 - B^2 + C^2 - D^2 + E^2)
- X = 1.92925
I also found a parameter that transforms into equilateral and right isosceles triangles. This is uploaded as "equilateral and isosceles right triangle.3mf".
正三角形と直角二等辺三角形に変形するパラメータも見つけました。これは「equilateral and isosceles right triangle.3mf」としてアップロードしておきます。
- length_A = 25
- length_B = 45 - X
- length_C = 45 - X
- length_D = 25
- length_E = 35 - X/2
- length_F = sqrt(A^2 - B^2 + C^2 - D^2 + E^2)
- X = 3.981137