Wrapped Gift - Single Extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is my Wrapped Gift Model for printing with a Single Extruder just print the 2 parts then slide them together.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 169
- Wydruki
- 1
- Wyświetlenia
- 1008
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is my Wrapped Gift Model for printing with a Single Extruder
just print the 2 parts then slide them together.
I printed the Body with Zero Infill, and the Ribbon/Bow with 10% infill to maksure3 the bow was supported while it was printed.
I used Fillamentum Signal Red and Gold happens for my print.
I hope you enjoy the print and
Merry Christmas
Thanks
Bugman
If you like what I am doing please consider buying me a coffee or tipping. 😁👍
Print instructions
This all prints without supports,
I printed the main body with Zero infill and 0.2mm layer heights,
and teh Ribbon/Bow at 0.15mm Layers with 10% infill to support the bow while it printed.