iTouchless DZT battery cover replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original batter cover fell off and vanished. I made this to replace it...mostly
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have an old iTouchless garbage can that we keep in the garage and while it takes some abuse it's held up for a long time. Recently the battery cover broke off and vanished and this model is so old you can't even replace it with OEM.
I made this to hold the batteries but some of the plastic supports seem to have snapped so I used an oscillating tool to just notch out some plastic and drilled a small hole for a screw to hold it. This was my prototype but it fit so well I just drilled the hole thru it rather than model it.
Printed in PLA, 15% infill nothing magical. Flip it 180 and no supports clearly.