Bambu Lab P1S Top Cover Spacers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacers designed to raise the Bambu Lab P1S' top cover away from the printer. This is to help with air flow and heat.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 327
- Wydruki
- 2
- Wyświetlenia
- 2136
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
These spacers are designed to raise the top cover of the Bambu Lab P1S away from the top of the printer. This creates a gap that air can flow out of to help with heat creep. In my opinion, this is a lot better than simply removing the cover entirely. As an added plus, they look pretty good!
These are primarily for PLA printing. ABS works better with a heated enclosure, so these would need to be removed.
Print each of the four parts. The curved corners go in the back, and square corners in the front. The lefts and rights are rotations of each other, I renamed them to make it more clear you need to print two of each. No supports are required.