LCR-T4 component tester universal case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This case was designed to fit the different variations of the LCR-T4 component tester. It has plenty of room for…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 321
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This case was designed to fit the different variations of the LCR-T4 component tester. It has plenty of room for various types battery connectors and differently sized PCBs. The board can be slightly aligned during assembly for a perfect fit.
This case was inspired by another design (https://www.thingiverse.com/thing:797733), but it was made from scratch in Fusion 360. The STEP, and F3D files are included, if you wish to make any modifications.
You will need 2 M312, 2 M318 bolts, 2 M3 nuts, and 2 M3 threaded inserts during assembly. The top and bottom parts must be squeezed together while tightening the bolts on the front of the case, so that there is no gap between them.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.2 mm
Category: Electronics