1 / 2
Cable Repair Cover for Mouse
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cable cover for the mouse to cover the exposed part of the wire.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
This is a cable cover for “Logicool M125” mouse to cover the exposed part of the wire.
Build info
- No support is required.
- It can be printed from PLA.
- It consists of two parts, and the mechanism is to fit the cylinder of the other part into the hexagonal hole in one part.
- I printed with 0.4mm nozzle. But it may NOT work well with 0.4mm nozzles because of the small dimensions of the model.
- It is strongly recommended that you use a smaller nozzle or scale it according to the size of your mouse.
Remix this model for your mouse!