Drone landing gear - SJRC F11 pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Landing gear for drone SJRC F11 pro
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 286
- Wydruki
- 0
- Wyświetlenia
- 1958
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
The sjrc f11 pro drone has a very low rear propeller, therefore it has problems with landing on grass and rocky terrain. Mounting the landing gear solves this problem (If you do not have a landing pad), because it raises the drone approximately 7 cm above the ground.
They allow for quick assembly and disassembly, which allows you to transport the drone in its default form
Recommended print settings
- 0.4 mm nozzle
- 0,2 layer height
- 3 wall layers
Models are printed on ASA and PET-G without support and have sufficient stiffness.
Weight 4 parts approx. 20 g depending on the material you used.
When printing, you can mirror the second front and rear gear, but this does not affect the functionality.