Makita DDF485 Bit Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This hex bit holder holds 10 bits and a bit holder. It is supposed to be screwed to a Makita drill.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 90
- Wydruki
- 2
- Wyświetlenia
- 1186
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This hex bit holder holds 10 bits and a bit holder. It is supposed to be screwed to a Makita drill using the screw hole at the drill handle.
The bits and holder are held by small magnets.
Always have your most useful bits at hand!
You will need:
- 8 Neodym Magnets, diameter 4mm height 2mm
- 2 Screws for wood or sheet metal, diameter 2,2mm 19mm length
- 1 Machine screw M4x16mm
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
Yes
Resolution:
0,15mm
Infill:
15%
Filament:
[doesn't matter PLA ] to your liking
Notes:
The top part needs support for the side part. I used support enforcers to concentrate support there.
Post-Printing
- Insert the Magnets in the holes, 5 for the bits, 3 for the bit holder. Fix the magnets using Super Glue.
- Stack the 3 parts and screw together using the 2,2x19mm screws.
- Screw to Makita drill using a machine screw M4x16
Category: Tool Holders & Boxes