1 / 6
Acrylic Painting Pour Star — zdjęcie 1
1 / 6

Acrylic Painting Pour Star

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple pouring template for acrylic pour painting. Gently pour paint into the center and it will flow down the sides.

Ocena
5 / 5
Polubienia
24
Pobrania
232
Wydruki
2
Wyświetlenia
958
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I saw someone on the tube making a really cool pattern using the bottom of a cup. I didn't have any cool faceted bottom cups, but I do have OpenSCAD and a printer!

This is purely a functional item, so I designed and printed with a 0.8mm nozzle in mind. You can use any size nozzle, but precision isn't important.

Due to the shape, supports in the center *are* required! I used a cylinder that was just a bit smaller than the center. I didn't bother getting all of the support material out.

In use it's simple, put the star on your canvas and pour paint into the top. As it overflows, it runs down the little channels and onto your canvas. The trick is getting the star up. I used the slicer and created some 10x10x2 tabs to glue onto the side to get them up.

I was tempted to sand or prime these to prevent paint from seeping through but that turns out to not matter. I rinsed off the paint with water and after drying for a day or 2 I think these will be re-usable for quite a while.