1 / 2
Cat Costume (Hueforge)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament painted print made using HueForge.
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 113
- Wydruki
- 4
- Wyświetlenia
- 558
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 4) (Komentarze: 7)Remiksy (0)Kolekcje (40)Powiązane
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black
PLA Azurefilm Wine Red
PLA Bambu Basic Orange
PLA+ Sunlu Yellow
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Wine Red
At layer #12 (1.04mm) swap to Orange
At layer #18 (1.52mm) swap to Yellow for the rest.
*If Scaling the model make sure not to adjust the Z-Height of the model*