Surprise Egg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a breakable egg that i modelled on Fusion 360 after i could not get hold of any Hatchimals Colleggtibles for…
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 290
- Wydruki
- 1
- Wyświetlenia
- 3314
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a breakable egg that i modelled on Fusion 360 after i could not get hold of any Hatchimals Colleggtibles for my son, So i decided to print some untill i could get some real ones later.
I printed a Yoshi by @Carmelo_Nazario to put in mine, I suggest you check him out over at
https://www.patreon.com/TheCreatorx3D
but you can put in whatever will fit.
Have Fun
Nick
Print instructions
the infill really doesn't matter, I printed this with a 0.4mm nozzle and 3 x perimeters and it came out perfect,
however if you want to add an object inside the Egg, you will need to add a pause at the correct height, then drop in the object and continue printing