11ty Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Share Alike
Logo for 11ty static site generator.
I printed to mount on my laptop (scaled 50% model size).
The two parts are:
- The 11ty logo with bevel around the corners.
- A shallow base to give contrast between the frame and letters.
I printed the frame black and base white, then glued the two together. Being such a small model, I printed at 100% infill. I also recommend 0.12mm layers to give the bevel more definition.
View model in Tinkercad: https://www.tinkercad.com/things/b9EyS3S6KZf
Print Settings
Printer:
Creality CR-10 v2
Rafts:
No
Supports:
No
Resolution:
0.12mm
Infill:
100%
Filament:
Hatchbox PLA Black, White
Post-Printing
Because of the beveled edges, I don't recommend ironing the top layer. Sanding with a 400-800 grit should help to erase the print lines on the top layer.
How I Designed This
11ty logo used for letters. Frame added to proportion with logo image.