1 / 4
Swatch for filaments - Samples of your colors
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's a little print to insert a small amount of each of your filaments to show your colors selection.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple base to hold your filaments. It's made to show your color selections.
Just cut a section of +/- 32mm of each color.
My print settings:
- resolution (Layer height) 0.20 mm or better.
- 3 perimeters
- 20 % infill
- No support needed
- 8mm brim for better adhesion
- Print standup on the bed like in the picture