1 / 4
Impellor for Maxi-Jet Powerhead 1200 (Marineland)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Impellor for the Maxi-Jet Powerhead 1200. No supports needed.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement impellor for Powerhead 1200 pump.
Recommend printing with PETG since it's a moving part.
Make sure you clean the print bed thoughly before printing for an aquarium.
Model can be found in Thinkercad: https://www.tinkercad.com/things/fk4qlP7NCrg-impellor-maxi-jet-powerhead-1200-marineland