Tennis Racket/Racquet Keychain & Ornament
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Serve up some fun this holiday season with a tennis racket ornament! I think this racket looks relatively generic, but…
- Ocena
- 4,917 / 5
- Polubienia
- 90
- Pobrania
- 1406
- Wydruki
- 13
- Wyświetlenia
- 2889
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Serve up some fun this holiday season with a tennis racket ornament! I think this racket looks relatively generic, but was based on the based on the Babolat Pure Drive if you're wondering.
Could alternatively be used as a keychain.
No supports needed- prints kind of flush on one side (aside from a 45-degree chamfer)
Print Settings
Supports:
No
Resolution:
0.15
Infill:
Doesn't Matter
Filament:
Doesn't matter, PLA was used for the example images
Notes:
Need very good bed adhesion for the grid to stick on the first layer.
First Layer Setting Suggestions:
Layer Height - 0.3 mm
Print Speed - 8 mm/s
Bed Temp - 70 C
Glue Stick
Outer Brim