Duet Wifi Turbo Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an enclosure for the Duet Wifi board. FT5 Duet Wifi mount and Fan Duct by Garrett_w was the base for the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 314
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is an enclosure for the Duet Wifi board.
FT5 Duet Wifi mount and Fan Duct by Garrett_w was the base for the mount, Honeycomb 120mm fan grill by Segeer was the base for the grid.
Under the enclosure put a 140mm fan in order to ensure a lot of cooling for the drivers.
I used M3 x 2 screws for assembling the cover, M4 x 4 screws and nuts for joining the enclosure to the fan below. M3 x 4 screws were used to jon the feet to the fan (the feet don't need nuts).
Feel free to remix and modify to your needs.
Category: 3D Printer Accessories