Snap-on electric tool holder / cup w/ insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This should be 99% of the dimensions of the OEM snap on toolholder or cup
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 134
- Wydruki
- 1
- Wyświetlenia
- 1358
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I broke a toolholder and needed a new one!
So I pulled out some calipers and kinda made one similar in size
This can be printed in any orientation, although the way it is should be fine.
This is dimensionally accurate enough to accept the old soft rubber insert and fit onto the metal backing.
I left the back without holes so that you may drill them yourself.
Let me know if you want one with hole guides or to change up the model I can do that.
Use whatever settings you want for this - I used 100% infill
---Update--- Sept 10 2024
Added a cup insert for use with my model
I recommend TPU with probably around 10-20% infill. Can print out of any material obviously.