Honda ADV access card mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Access card mount that screw into the windshield of Honda ADV
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 566
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Make sure your card can be scan at the location before printing it
low profile access card for gated community mount for Honda ADV
it might work with other but im not sure
you can also place a nfc card inside for your contact number or other information too
installation is simple
- unscrew the 4 screw they don't need to be remove just lose enough
- side down the windshield
- put the mount on and make sure it is behind the rubber bump so it is against the windshield
- put it back on and slide it upwards make sure it have gone up the holes
- screw it in but not too tight just enough that it wouldn't slide off
- give it a good pull to make sure it really wouldn't slide off
- place your access card in it
V2 installation is slightly different
follow how the mount is place on the windshield as shown in the pictures or basically the flat side of the model is facing towards you
Inserting and removing card when installed
Inserting
you kinda have to use 2 finger to place the card in the rails due to the bump on the windshield
after that just push it all the way in you may have to press the card down to ensure it is on the right place
removing
use your finger and push on the back of the card on the opening and then just slide it upwards
feel free to leave suggestion as i have no idea what can make it even better
or remix it if you can
also use matte black if you can as that blends in way better
V2 improvement
- card won't shake around
- simmer than v1
- easier to place and remove card
v1 left v2 right