Madona and Child Christmas Decoration
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
5,02 € – 6,13 € netto (bez VAT)
Dla pliku: madonaandchildsteele_0.4n_0.2mm_PLA_MK3S_6h20m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 5,57 € netto (środek widełek).
- Masa podana przez autora
- 54 g
- Czas druku podany przez autora
- 6,33 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Madona and Child Christmas Decoration
- Ocena
- 0 / 5
- Polubienia
- 79
- Pobrania
- 238
- Wydruki
- 0
- Wyświetlenia
- 1344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
Corner Fixed Madona and Child Ornament/Decoration.
Print this standing with the details facing right on the Y axis. Use organic supports if resizing.
Will print with .4 nozzle if you dont resize. If you shrink it by more than 30 percent use a .2 nozzle.
I think I may take a foray into fixing up broken antiquities. I am finding sculpting fixes into broken parts to be a bit challenging. Not even to the point where I am worried about academic historical accuracy… just blend it make it look good. This is my first attempt. I am finding that using the Elastic Deform seems to be the most useful. then move into fill and or draw/smooth stuff.
The bottom right corner was broken ¼ across the bottom.