Danby Air Conditioner Vent Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix for the replacement of Danby 1200BTU portable air conditioner vent connector that should be easier to print.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 1017
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Original
This is a replacement vent bracket for a Danby 12,000 BTU Portable 4-in-1 Air Conditioner.
top ring inner/outer diameter = 122/126 mm
middle ring inner/outer diameter = 131/135 mm
bottom ring inner/outer diameter = 150/154 mm
Remix
I like the original model because the measurement and fit for it is excellent, but it's a bit hard to print.
In the remix I make some of the internal edges sloped so they don't overhang and require supports, and the only part of the model that needs supports is hose connectors. It should be easier and slightly faster to print.
This is a remix of https://www.thingiverse.com/thing:2389058 thingiverse seems to be in a state of disrepair so I'm posting the model here.
V2
2024-04-21 Added supports for the edges of the clips