Toggle Necklace <Print in Place> with Interchangeable Charms
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two sizes. Small necklace is ~500mm and Large necklace is ~740mm
- Ocena
- 0 / 5
- Polubienia
- 79
- Pobrania
- 297
- Wydruki
- 1
- Wyświetlenia
- 855
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
What is ‘fine’ plastic jewelry? Print this design in a couple hours and wear it tonight. It's so easy to make. Lift it off your build plate and put it on.
For the charms, use a bit of pressure to snap the oval bail onto the charm, then they slide onto the necklace using the open groove.
Print multiple sizes and stack them all!
My prototypes were printed at .2mm layers with 15% infill. I did the final versions at .16mm layer with 100% infill. It's only a couple extra grams and an extra hour or so and worth it. No supports, no brim. I used a glue stick on a smooth high temp build plate.
I tried a bunch of yellows and gold filaments. I ended up using the Mika3d gold to white on amazon. It has a real shimmer in person!
Want to see a video of my design process? Check this out on you tube.
This is my first upload to Printables. Follow me for more pieces coming next week. If you have any questions, or want to suggest changes let me know. I look forward to seeing your makes!
-Walt